Pfiffner Hydromat

    Rotary transfer machines with up to 24 machining units

    The Pfiffner Hydromat series includes flexible and highly precise rotary transfer machines with modular, hydraulic, CNC-controlled machining units. Pfiffner Hydromat HC EPICplus rotary transfer machines can use up to 24 fully automated machining units simultaneously, while the Pfiffner Hydromat LEAN entry-level model operates up to 18 machining units simultaneously. This enables even large production orders to be completed in the shortest possible time and in top quality.

    INDUSTRIES

    Equal to any challenge – not only in these industries

    Automotive OEMs and Suppliers

    Highly productive high volume machining of precision parts

    Watchmaking

    High-precision high volume machining of watch and jewelry parts

    ADVANTAGES

    HOW TO BENEFIT FROM PFIFFNER HYDROMAT ROTARY TRANSFER MACHINES

    Enhanced performance

    Pfiffner Hydromat rotary transfer machines offer up to 24 stations for machining rotationally symmetrical workpieces up to a maximum clamping diameter of 52 mm and total length of 170 mm, or for cubic workpieces with an edge length of 100/120 mm (Hydromat HC-U) with workpiece lengths up to 150/200 mm.

    All types of machining

    Pfiffner Hydromat rotary transfer machines enable 3-sided machining with repositioning or 5-sided machining without repositioning (Hydromat HC-U). Almost everything is possible: including milling, honing, forming and assembly via pressing, reaming, slotting, broaching and grinding.  

    Greatest overall efficiency

    Pfiffner Hydromat rotary transfer machines offer extremely short idle times due to forced-controlled Pfiffner hydraulic valves. So round and cubic precision parts can be produced in a matter of seconds.

    Maximum flexibility

    The machining units on Pfiffner Hydromat rotary transfer machines are interchangeable between all sizes and the machine controls can be used to freely configure up to 4 axes. This highly flexible system forms the foundation for efficient machine setup when changing parts.

    APPLICATIONS

    TOP PERFORMANCE FOR MAXIMUM PRECISION

    Pfiffner Hydromat rotary transfer machines permit machining from bar, coil or via automatic parts feeders. Setting up the machining stations in horizontal and vertical arrangement enables just-in-time machining of large production orders with the highest throughput.

    • Hydraulics

      Hydraulic pipe

      Pfiffner Hydromat rotary transfer machines can be used for precise and effective machining of ST52-3 steel hydraulic pipes with minimum cycle times of just 13 seconds. 

    • Chassis

      Banjo connector

      Pfiffner Hydromat rotary transfer machines can be used for precise and efficient machining of banjo connectors made from 1.4301 chromium-nickel steel, with minimum cycle times of just 11.7 seconds. 

    • Miscellaneous

      Rollers

      Pfiffner Hydromat rotary transfer machines offer you maximum precision and overall efficiency when machining rollers made from 9SMnPb36K steel, with minimal cycle times of only 7.5 seconds. 

    • Chassis

      Tie rod

      Pfiffner Hydromat rotary transfer machines are impressive in the precise and efficient machining of tie rods made from 100Cr6 bearing steel, with minimal cycle times of just 5 seconds. 

    • Miscellaneous

      Ignition support

      Pfiffner Hydromat & Pfiffner PT rotary transfer machines enable precise and efficient machining of ignition supports made of 1.4301 chromium-nickel steel, with minimum cycle times of only 8 seconds. 

    • Miscellaneous

      RF connectors

      Pfiffner Hydromat and Pfiffner PT rotary transfer machines can be used to machine RF connectors made of CuZn39Pb3 brass with minimum cycle times of just 2.2 seconds. And with maximum precision and overall efficiency. 

    • Miscellaneous

      Contact tip

      Pfiffner Hydromat rotary transfer machines leave nothing to be desired in the precise and efficient machining of contact centers made from CuCrZr, with minimal cycle times of just 4.5 seconds. 

    • Compressor

      Center sleeve

    • Miscellaneous

      Involute splines

    • Chassis

      Steering worm

    • Chassis

      Valve seat (ABS)

    • Transmission

      Planetary gear

    • Transmission

      Planetary gear bolt

    • Transmission

      Countershaft

    • Engine

      Camshaft

    • Engine

      Cam

    • Engine

      Cylinder head

    MACHINE TYPES

    THE RIGHT ROTARY TRANSFER MACHINE FOR EVERY REQUIREMENT

    The structure and equipment on each Pfiffner Hydromat rotary transfer machine is matched to the workpiece to be machined. This modularity assures individual, needs-based solutions and greatest investment protection.

    • Pfiffner Hydromat EPICplus HC 25-12
    • Rotary transfer machine
    •  
    • Pfiffner Hydromat EPICplus HC 32-16
    • Rotary transfer machine
    •  
    • Pfiffner Hydromat EPICplus HC 45-12
    • Rotary transfer machine
    •  
    • Pfiffner Hydromat EPICplus HC 45-16
    • Rotary transfer machine
    •  
    • Pfiffner Hydromat EPICplus HC 52-12
    • Rotary transfer machine
    •  
    • Pfiffner Hydromat EPICplus HC 12-U
    • Rotary transfer machine
    •  
    • Pfiffner Hydromat EPICplus HC 16-U
    • Rotary transfer machine
    •  
    • Pfiffner Hydromat HL 25-12 LEANbasic
    • Rotary transfer machine
    •  
    • Pfiffner Hydromat HLC 25-12 LEANhybrid
    • Rotary transfer machine
    •  

    GALLERY

    EXPERIENCE TOP PERFORMANCES

    Pfiffner Hydromat rotary transfer machines excel in every production environment in terms of performance, efficiency and product quality. Obtain gripping insights into our machines' work environment here.

    DOWNLOAD CENTER

    IMPORTANT FACTS OF PFIFFNER HYDROMAT ROTARY TRANSFER MACHINES

    Product brochures

    RELATED SERIES

    DISCOVER THE ENORMOUS OPPORTUNITIES OF THE FFG WORLD

    IMAS IMASTRANSFER

    IMASTRANSFER rotary transfer machines with up to 24 stations are innovative transfer machines for mass production. IMASTRANSFER enables the use of mechanical, NC or mixed machining modules as well as of sloping or upright units.

    Witzig & Frank Turmat

    Witzig & Frank Turmat rotary transfer machines offer four to ten stations and up to 27 parallel processing units, e.g. for drilling, milling, thread cutting, honing, grinding, turning, reaming, forming, annealing, measuring, testing and assembly.

    Witzig & Frank LSA-Uniflex

    Witzig & Frank Uniflex standard rotary transfer centers offer four stations and up to six machining units plus up to three fully CNC-controlled rotating units. Modular 3-axis units with tool changers ensure maximum flexibility.

    Inquiry

    Submit your inquiry about this series here

    captcha
    We process your data according to our privacy policy
    *Obligatory fields