Series

VDF Boehringer VDF Cx

Individually configurable machines for crankshaft machining

The modular design of VDF Cx machines for crankshaft machining enables them to be individually configured and they are characterized by the highest production quality and reliability while at the same time by low investment and maintenance costs. VDF Cx crankshaft machining centers have highly diverse loading concepts and are ideally matched to the differing requirements in stand-alone machine and interlinked operation.

INDUSTRIES

Equal to any challenge – not only in these industries

Automotive OEMs and Suppliers

System solutions for all crankshaft types

Truck manufacturers and suppliers

Modular system for large crankshafts including all machining technologies

ADVANTAGES

HOW TO BENEFIT FROM VDF Cx CRANKSHAFT MACHINING CENTERS

Enhanced performance

VDF Cx machines enable the machining of crankshafts and camshafts made of high-strength materials and up to 6,000 mm long. Powerful main and counter spindles alongside milling drives with active spindle cooling cater for top cutting performance.

Maximum efficiency

VDF Cx machines for crankshaft machining enable short setup times through the use of hydraulic clamping devices for tool changing. Easy accessibility via the sliding and removable machine cover increases ease of maintenance and ensures short service times. Customized user interfaces reduce downtimes and training times.

Top precision

The design of VDF Cx machines with their mineral cast inclined bed and guideway arrangement in one plane offers the greatest rigidity and precision. Cooled spindles, the defined use of minimum lubrication and the use of sensors for temperature monitoring enable top precision and production quality.

Ideal ergonomics

The excellent soundproofed work area in VDF Cx crankshaft machining centers uses decoupled sheeting to reduce noise levels to a maximum of 75 dBA or optionally even to 72 dBA.

Regular maintenance activities can be performed from ground level without the need to access the machine from above.

The consistently ergonomic arrangement of control elements ensures an ideal work environment and obviates the need to enter the machine interior. These advantages in VDF Cx machines are realized within a compact and minimized machine footprint.

APPLICATIONS

TOP PERFORMANCE FOR MAXIMUM PRECISION

Modular VDF Cx crankshaft machining centers permit a wide variety of necessary machining operations, such as cutting to length and centering (CET), turning/ turn broaching of center bearings (CB), external milling (CM) and internal milling (CIM) of pin bearings including machining of counterweights, drilling operations for oil channels (CD) and the like, end machining (CET) and fine turning (CT) of flange, pin, flange bearing and transducer ring contour.

The combination of individual technologies within one machine provides flexible solutions for small and medium series (CMT, CMB)

The use of B-axes (TM) within the larger machine series enables complete machining of shafts in a single setup.

Pumps
Pump shaft
VDF Boehringer VDF Cx machines enable complete machining of pump shafts from 50 mm to 6,000 mm, including cutting to length and centering, wet and dry machining or minimum lubrication and finishing via tangential turning.
Miscellaneous
Shaft parts
VDF Boehringer VDF Cx machines enable complete machining of shaft parts, including cutting to length and centering, wet and dry machining or minimum lubrication and finishing via tangential turning.
Chassis
Wheel axle
VDF Boehringer VDF Cx machines enable complete machining of shafts, including cutting to length and centering, wet and dry machining or minimum lubrication and finishing via tangential turning.
Powertrain
Drive shaft
VDF Boehringer VDF Cx machines enable complete machining of drive shafts, including cutting to length and centering, wet and dry machining or minimum lubrication and finishing via tangential turning.
Powertrain
Drive shaft
VDF Boehringer VDF Cx machines enable complete machining of drive shafts, including cutting to length and centering, wet and dry machining or minimum lubrication and finishing via tangential turning.
Electric drive
Rotor
VDF Boehringer VDF Cx machines enable complete machining of rotors, including cutting to length and centering, wet and dry machining or minimum lubrication and finishing via tangential turning.
Transmission
Main shaft
VDF Boehringer VDF Cx machines enable complete machining of main shafts from 50 mm to 6,000 mm, including cutting to length and centering, wet and dry machining or minimum lubrication and finishing via tangential turning.
Transmission
Countershaft
VDF Boehringer VDF Cx machines enable complete hard and soft machining of countershafts, including cutting to length and centering, wet and dry machining or minimum lubrication and finishing via tangential turning.
Engine
Balance shaft
VDF Boehringer VDF Cx machines enable complete processing of balance shafts from 50 mm to 6,000 mm, including cutting to length and centering, wet and dry machining or minimum lubrication and finishing via tangential turning.
Engine
Car crankshaft
VDF Boehringer VDF Cx machines enable the machining of car crankshafts up to 550 mm (VDF 221 Cx) or 750 mm (VDF 226 Cx), including cutting to length and centering, turning/ turn broaching, external/ internal milling, turning, end machining and technology combinations.
Engine
Truck crankshaft
VDF Boehringer VDF Cx machines enable the processing of truck crankshafts up to 1,300 mm (VDF 321 Cx) or 1,500 mm (VDF 326 Cx), including cutting to length and centering, turning/ turn broaching, external/ internal milling, turning and end machining.
Engine
Special crankshaft
VDF Boehringer VDF Cx machines enable the machining of special crankshafts up to 6,000 mm (VDF 650 Cx), including cutting to length and centering, turning/ turn broaching, turning, end machining and technology combinations.
Engine
Car camshaft
VDF Boehringer VDF Cx machines enable the machining of car camshafts up to 550 mm (VDF 221 Cx) or 750 mm (VDF 226 Cx), including cutting to length and centering, turning/ turn broaching, external milling, turning, end machining and technology combinations.
Engine
Truck camshaft
VDF Boehringer VDF Cx machines enable the machining of truck camshafts up to 1,300 mm (VDF 321 Cx) or 1,500 mm (VDF 326 Cx), including cutting to length and centering, turning/ turn broaching, external milling, turning, end machining and technology combinations.
Engine
Crankshaft
Engine
Camshaft

MACHINE TYPES

THE RIGHT CRANKSHAFT MACHINING CENTER FOR EVERY REQUIREMENT

VDF Cx machines are the perfect solution for powerful, precise and cost-effective machining of crankshafts and camshafts with lengths from 200 to 6,000 mm.

For lengths up to 550/750 mm, the VDF 221/226 Cx offers ideal conditions with simultaneously optimized space requirements.

For lengths up to 800/1,300 mm, the VDF 320/325 Cx is first choice.

For lengths up to 6,000 mm, the VDF 450 T / VDF 450 TM or the VDF 650 T / VDF 650 TM can be used depending on the application.

VDF Boehringer VDF 221/226 CM
Crankshaft machining center

VDF Boehringer VDF 320/325 CM
Crankshaft machining center

VDF Boehringer VDF 221/226 CB
Crankshaft machining center

VDF Boehringer VDF 320/325 CB
Crankshaft machining center

VDF Boehringer VDF 221/226 CT
Crankshaft machining center

VDF Boehringer VDF 221 CIM
Crankshaft machining center

VDF Boehringer VDF 220 CD
Crankshaft machining center

VDF Boehringer VDF 220 CE
Crankshaft machining center

GALLERY

EXPERIENCE TOP PERFORMANCES

VDF Cx crankshaft machining centers excel in every production environment in terms of performance, efficiency and product quality. Obtain gripping insights into our machines' work environment here.

RELATED SERIES

DISCOVER THE ENORMOUS OPPORTUNITIES OF THE FFG WORLD

VDF Boehringer VDF T/TM

Horizontal turning centers or turning-milling centers in the VDF T/TM series are the ideal choice for machining shafts and chuck parts in mass production for the automotive industry and its suppliers and for manufacturers and suppliers in the field of medium- and small-batch production.

Learn more

MAG SPECHT DUO

The two spindles are synchronized in X/Y/Z via "dynamic axis compensation". Compensation of the spindle offset brings the precision of the single-spindle machine to the DUO.

Learn more

Tacchella Crossflex

Tacchella Crossflex external cylindrical grinding machines are equipped with a conventional 610 mm grinding wheel or a CBN 500 mm grinding wheel for high-speed cuts.

Learn more

Tacchella Pulsar

Tacchella Pulsar external cylindrical grinding machines are the ideal grinding solution for medium to large batch sizes. The Pulsar offers crossed and hydrostatic X and Z work axes and enables the use of both conventional and CBN grinding wheels with high cutting speeds.

Learn more

Inquiry

Submit your inquiry about this series here

Product

Title*

Name*

First name

Company*

Street and house number*

Postcode*

Town/city*

Country*

E-mail*

Telephone

Message

We process your data according to our privacy policy

*Obligatory fields

Inquire now

Please select a Country to show your contact person

Eike Fretzer

FFG Europe & Americas

Telephone+49 172 7 91 71 68

E-Maileike.fretzer@mag-ias.com

Eike Fretzer

FFG Europe & Americas

Telephone+49 172 7 91 71 68

E-Maileike.fretzer@mag-ias.com

Eike Fretzer

FFG Europe & Americas

Telephone+49 172 7 91 71 68

&nbsp;

VDF Boehringer VDF Cx

Individually configurable machines for crankshaft machining

INDUSTRIES

Equal to any challenge – not only in these industries

Automotive OEMs and Suppliers

Truck manufacturers and suppliers

ADVANTAGES

HOW TO BENEFIT FROM VDF Cx CRANKSHAFT MACHINING CENTERS

Enhanced performance

Maximum efficiency

Top precision

Ideal ergonomics

APPLICATIONS

TOP PERFORMANCE FOR MAXIMUM PRECISION

Pump shaft

Shaft parts

Wheel axle

Drive shaft

Drive shaft

Rotor

Main shaft

Countershaft

Balance shaft

Car crankshaft

Truck crankshaft

Special crankshaft

Car camshaft

Truck camshaft

Crankshaft

Camshaft

MACHINE TYPES

THE RIGHT CRANKSHAFT MACHINING CENTER FOR EVERY REQUIREMENT

GALLERY

EXPERIENCE TOP PERFORMANCES

RELATED SERIES

DISCOVER THE ENORMOUS OPPORTUNITIES OF THE FFG WORLD

VDF Boehringer VDF T/TM

MAG SPECHT DUO

Tacchella Crossflex

Tacchella Pulsar

Inquiry

Submit your inquiry about this series here

Eike Fretzer

FFG Europe & Americas

Eike Fretzer

FFG Europe & Americas

Eike Fretzer

FFG Europe & Americas

Giuseppe Dall'Ora

FFG Europe & Americas

Giuseppe Dall'Ora

FFG Europe & Americas

Eike Fretzer

FFG Europe & Americas

Giuseppe Dall'Ora

FFG Europe & Americas

Giuseppe Dall'Ora

FFG Europe & Americas

Giuseppe Dall'Ora

FFG Europe & Americas

Giuseppe Dall'Ora

FFG Europe & Americas

Thomas Maringer

FFG Europe & Americas

Giuseppe Dall'Ora

FFG Europe & Americas

Giuseppe Dall'Ora

FFG Europe & Americas

Eike Fretzer

FFG Europe & Americas

Eike Fretzer

FFG Europe & Americas

Giuseppe Dall'Ora

FFG Europe & Americas

Giuseppe Dall'Ora

FFG Europe & Americas

Eike Fretzer

FFG Europe & Americas

Giuseppe Dall'Ora