MAG SPECHT DUO
Double-spindle CNC machining center with X/Y/Z axis compensation
MAG SPECHT DUO CNC machining centers are ideal as interlinked multi-machine systems. They can also be used as a stand-alone machine and in manufacturing cells. The convincing feature of these double-spindle CNC systems is their modular structure, which provides maximum flexibility and makes them individually configurable. This makes it possible to use ball screw or linear motors for axis drive. Unique axis compensation achieves the same precision as that of single-spindle CNC machines.
INDUSTRIES
Equal to any challenge – not only in these industries

Foundries
System solutions for powertrain and structural parts

Automotive OEMs and Suppliers
System partner for the efficient production of cubic engine and transmission parts

E-Mobility
Exact precision manufacturing of engine and structural parts
ADVANTAGES
HOW TO BENEFFIT FROM MAG SPECHT DUO CNC MACHINING CENTERS
Maximum flexibility
A wide range of standardized parts enable single- or double-spindle MAG SPECHT CNC machines to be configured for specific customer requirements. Double-spindle CNC systems are available for spindle spacing from 540 to 810 mm.
Maximum yield rates
MAG SPECHT DUO CNC systems offer the highest yield rates with minimum footprint thanks to their compact design. The MAG SPECHT 450 DUO only requires 11.2 m², for example.
Top performance
MAG SPECHT CNC machining centers enable the shortest chip-to-chip times to under 2.5 seconds due to highly dynamic pick-up discs with top tool capacity. Rapid traverse permits up to 120 m/min and acceleration up to 1.5 m/s.
Single-spindle precision
SPECHT DUO CNC machines feature a unique compensation system in all linear axes. This sets the relative positioning of the two spindles with micron precision. Constant precision is achieved in conjunction with temperature compensation in the machine bed, the axes, the equipment and the workpiece.
APPLICATIONS
TOP PERFORMANCE FOR MAXIMUM PRECISION
Modular MAG SPECHT DUO CNC machining centers are convincing due to their ideal axis arrangement, shortest positioning times and least unproductive travels. Benefit from top precision and surface quality at maximum machining speed.
- Transmission
Transmission case
MAG SPECHT DUO CNC machining centers can machine transmission cases up to 805 mm in diameter and 950 mm high with absolute precision. This CNC hooked machine offers full compensation in all axes (X/Y/Z) and enables the shortest start-up times.
- Chassis
Steering housing
MAG SPECHT DUO CNC machining centers use tools up to 550 mm long to machine steering housings with absolute precision. The machine offers full compensation in all axes (X/Y/Z) and flexible direct loading from the front, from above or via a pallet changing system.
- Chassis
Wheel carrier
MAG SPECHT DUO CNC machining centers can machine wheel carriers up to 805 mm in diameter and 950 mm high with absolute precision. The machine uses the jig boring principle for highly precise machining and provides full compensation in the X/Y/Z axes.
- Electric drive
Stator housing
MAG SPECHT DUO CNC machining centers can machine stator housings up to 805 mm in diameter and 950 mm high with absolute precision. The machine offers full compensation in all axes (X/Y/Z), optional axis configurations and countless media ducts.
- Engine
Cylinder block - MAG SPECHT DUO
Dynamic tools on MAG SPECHT DUO CNC machines make them the perfect solution for the preparatory and finish honing of cylinder bores with full compensation in all axes (X/Y/Z). Maximum workpiece sizes: 805 mm diameter and 950 mm high.
- Engine
Cylinder head
MAG SPECHT DUO CNC machining centers are inspiring in the finishing of cylinder heads up to 805 mm in diameter and 950 mm high. This machine is equipped with a ball screw drive or linear motor and offers full compensation in the X/Y/Z axes.
- Powertrain
Differential housing
- Chassis
Drag strut
- Foundry
Aluminum parts
- Compressor
Housing
- Compressor
Compressor cylinder block
- Compressor
Scroll compressor housing
- Compressor
Scroll compressor rotor
- Pumps
Pump cover
- Pumps
Pump housing
- Turbine
Compressor housing
- Bogie
Axle box carrier
- Chassis
Steering knuckle
- Chassis
Axle support
- Chassis
Joint housing
- Chassis
Tie rod
- Powertrain
Differential carrier
- Electric drive
Battery cover
- Electric drive
Battery tray
- Electric drive
Transmission case
- Electric drive
Steering housing
- Electric drive
Motor housing
- Transmission
Converter housing
- Transmission
Valve body
- Engine
Exhaust manifold
- Engine
Intake manifold
- Engine
Bed plate
- Engine
Crankshaft
- Engine
Bearing cover
- Engine
Bearing frame
- Engine
Cam cover
- Engine
Oil pan
- Engine
Con rod
- Engine
Connecting rod
- Engine
Front cover
- Engine
Cylinder liner
- Turbocharger
Bearing housing
- Turbocharger
Turbine housing
- Turbocharger
Compressor housing
- Chassis
Brake caliper
- Chassis
Axle beam housing
- Chassis
Trailing arm
- Chassis
Trunnion link
- Structure
Aluminum skin part
- Compressor
Compressor cylinder head
MACHINE TYPES
THE RIGHT MACHINING CENTER FOR EVERY REQUIREMENT
MAG SPECHT DUO CNC systems enable both wet machining and 2-channel minimum lubrication with the finest dispensing for eco-friendly production. Steep walls in the machine bed and a chip tray ensure excellent chip removal during MQL processing.
- MAG SPECHT 450 DUO
- CNC system machine
- MAG SPECHT 500 DUO
- CNC system machine
- MAG SPECHT 500 DUO+
- CNC system machine
- MAG SPECHT 600 DUO
- CNC system machine
GALLERY
EXPERIENCE TOP PERFORMANCES
MAG SPECHT DUO CNC machining centers excel in every production environment in terms of performance, efficiency and product quality. Obtain gripping insights into our machines' work environment here.