Witzig & Frank Triflex 5X
Rotary transfer center with 6 sequential stations
The Witzig & Frank TriFlex 5X is a powerful rotary transfer center for simultaneous 5-axis machining without repositioning. TriFlex 5X machines are standard rotary transfer centers that offer top performance and yield rates due to minimized downtimes and high machine availability, even with dry machining of workpieces.
Equal to any challenge – not only in these industries
Automotive OEMs and Suppliers
Highly productive high volume machining of complex precision parts
Commercial vehicle manufacturers and suppliers
Complete machining of engine, steering and brake parts
Precise high volume machining of chassis, motor and power unit parts
HOW TO BENEFIT FROM WITZIG & FRANK TRIFLEX ROTARY TRANSFER CENTERS
Witzig & Frank Triflex 5X rotary transfer centers offer 6 sequential stations for machining rotationally symmetrical workpieces up to a D x L of 350 x 350 mm or for cubic workpieces at 350 x 350 x 350 mm. Other dimensions are possible after individual verification.
Witzig & Frank Triflex 5X rotary transfer centers can be adapted to individual requirements. This includes up to 40 freely assignable spindles being available. The generously dimensioned loading station enables highly productive automation solutions. A standard automation module with robots and drawer magazines is available for parts up to a L x W x H of around 200 x 150 x 150 mm. Internal coolant supply is an integral part of our standard module options.
Ideal overall efficiency
The Witzig & Frank Triflex 5X rotary transfer center enables 5-axis machining without repositioning using five 8-fold turret heads with a maximum torque of 175 Nm. Cycle time neutral loading and unloading minimizes idle times and increases the yield rate for large production orders.
Low space requirement
Witzig & Frank Triflex 5X rotary transfer centers offer a high power density with compact dimensions of only 9 x 8 m and low energy consumption.
TOP PERFORMANCE FOR MAXIMUM PRECISION
Witzig & Frank TriFlex 5X rotary transfer centers can be equipped with horizontal and vertical machining stations. The perfect basis for large, just-in-time production orders needing highest throughput.
- Electric drive
Witzig & Frank Triflex 5X rotary transfer centers have a machine frame that is optimized for thermal expansion and enable complete 5-sided machining of motor housings at consistently high quality.
With the Witzig & Frank TriFlex 5X rotary transfer center you can machine AGR housings on five sides in a single setup. You avoid multiple setups and optimize the overall process time and product quality.
Witzig & Frank TriFlex 5X rotary transfer centers offer specialized angular heads for the internal machining of piston bores on multi-piston brake calipers. Fixed mounting of the angular drill heads ensures top precision and availability.
- Electric drive
Electric motor housing
The Witzig & Frank TriFlex 5X rotary transfer center machines the quality-determining features of electric motor housings on five sides in a single setup. The large holes are pre-machined by circular interpolation milling.
Witzig & Frank TriFlex 5X rotary transfer centers offer you complete 5-sided machining of trunnion links in a single setup with ideal drive configuration for machining torques up to 175 Nm using an HSK 80 tool holder.
Witzig & Frank TriFlex 5X rotary transfer centers offer you complete 5-sided machining of compressor housings in freely defined spatial angles. Their special machine design permits the use of large planar and contour machining tools.
Witzig & Frank TriFlex 5X rotary transfer centers have a machine frame that is optimized for thermal expansion and enable complete 5-sided machining of cylinder heads at consistently high quality.
Witzig & Frank TriFlex 5X rotary transfer centers offer you complete 5-sided machining of wheel carriers in a single setup with ideal drive configuration for machining torques up to 175 Nm using an HSK 80 tool holder.
IMPORTANT FACTS OF WITZIG & FRANK TRIFLEX 5X ROTARY TRANSFER CENTERS
DISCOVER THE ENORMOUS OPPORTUNITIES OF THE FFG WORLD
MAG SPECHT DUO
The two spindles are synchronized in X/Y/Z via "dynamic axis compensation". Compensation of the spindle offset brings the precision of the single-spindle machine to the DUO.
IMASFLEX rotary transfer machines with up to three spindles per station enable up to 18 simultaneous operations on one workpiece. IMASFLEX offers high flexibility and reconfigurability. The IMASFLEX 150 is ideal for workpiece sizes up to 150 mm, even in small batch sizes. IMASFLEX 300 is suitable for workpiece sizes up to 600 mm.
Submit your inquiry about this series here
No country was selected!
Please select a country before you submit the form.
No valid zip was entered (characters)!
Please insert a zip with valid characters (only numbers allowed).
No valid zip was entered (length)!
Please insert a zip with the correct length (5 characters).